craigslist | tools in buffalo

DeWalt Scroll Saw-like new (Orchard Park) $350

2009-12-23T00:23:18-05:00

DW788 Scroll Saw with stand and light. Just tuned up at the DeWalt service center. 350/OBO rick- 574-6349

Delta 28-280 14" USA bandsaw w/free aircleaner (Orchard Park) $725

2009-12-23T00:21:57-05:00

Delta Bandsaw 28-280 only used to cut out Pinewood Derby Cars. Enclosed Base Saw. Made in USA. USA motor. Includes upgraded Kreg fence a mobile base, riser block for 12" clearance and some 3 premium blades. Out of the basement in the garage and ready to go!! Not the cheap Chinese bandsaw like the 28-206 that have been made recently.

rick- 574-6349

From Popular Woodworking Magazine:

Best New Tools of 2004

The band saw is a strange machine in the American woodshop. British woodworkers often build their shops around the band saw the way we do a table saw. We tend to use a band saw infrequently, and then for a couple of minutes and for an ever-changing variety of reasons. It may be trimming the tails on some drawer sides one moment, then shaping a cabriole leg the next. It's a versatile machine that sits in the corner of our shops patiently waiting for its next task.

Whenever a reader asks for a recommendation on what type of band saw to buy, we heartily recommend a 14" stationary machine with a 1 hp motor and the ability to add an extension block to increase the resaw capacity. It's what we use every day, and our Delta 28-280 has never let us down in the four years we've owned it.

This solid, stationary machine offers good blade capacity ( 1/8" to 3/4" widths) for fine curves or heavy resawing. The 1 hp motor has proved powerful enough for most tasks, though you should take it easy when resawing dense or particularly wide wood.

The table is solid and easily adjustable, locking tightly at any angle across a 48� arc. The table is also pre-milled flat and tapped for screws on the infeed and outfeed sides. This makes attaching accessories (both shop-made and aftermarket) an easier task.

Changing blades on the Delta 28-280 is straightforward, with relatively easy access to the blade. The dust collection hook-up on the unit is correctly placed, and does manage to collect a reasonable amount of dust. The only annoyance is the size of the port, which doesn't seem to fit any of our hoses.

Though it seems to be a mantra with many woodworkers, we haven't seen any reason to replace the blade guides on this saw. The guides are easily and independently adjustable to a very fine tolerance. While we have replaced the stock steel guide blocks with ceramic blocks, the guides continue to function admirably and precisely.

An inconvenience on this saw and most band saws is the blade-tensioning knob that requires strong wrists and too many revolutions to release and engage. This could be improved.

Another improvement we'd like to see is the addition of a rack-and-pinion adjustment mechanism for the blade guard/guide assembly. While the friction-fit system does the job, we've startled ourselves by accidentally letting the mechanism drop to the table loudly (and this is probably not great for the guides, either).

Though not a huge concern, many band saws now offer wheel-cleaning brushes that reduce the chance of dust buildup on the tires. Most of these systems are short of perfect, but they do keep the tires cleaner so the blades track easier to the center of the wheel.

One accessory we highly recommend is the 6" extension block kit. While the standard saw is a solid performer, by adding the accessory kit you immediately increase the resaw capacity from 6 1/4" to 12". That extra height has come in handy many times. The kit adds $90 to the cost of the saw, and you'll have to order different length blades (105"), but the money is well spent.

One of the upgrades offered on select models of this unit is a rip fence. We've made a half-dozen different fences for this saw throughout the years, and they've all done exactly what we wanted them to. But if your machinery dealer offers you the stock fence (a $100 value) for very little increase in the price of the saw, then go ahead.

So, while we have a few things we'd like to see added to the 28-280, we continue to use it frequently (though sporadically) with little fuss and much success. Our sources at Delta indicate that some of our wishes are being addressed on their new 14" saw (model 28-293) in the near future. PW

SPECIFICATIONS

Delta 28-280 14" Band Saw

Motor: 1 hp induction, 1,725 rpm

Capacity depth: 13 3/4"

Capacity height: 6 1/4"

Table size: 14" x 14"

Table tilt range: 45� right, 3� left

Blade capacity: 1/8"- 3/4" width

Weight: 224 pounds

Nice features: Solid performance, power and capacity for almost any task, optional riser kit to extend capacity.

Recommended modifications: Add ceramic guide blocks and wheel brushes as standard items. Spend the money to buy the height extension kit.

About Our Endurance Tests Every tool featured in our Endurance Test column has survived at least two years of heavy use in our shop here at Popular Woodworking.

Delta Mortiser-w/ 9 chisels (Orchard Park) $235

2009-12-23T00:19:46-05:00

Like new. Includes 9 chisels!! Used on Pinewood Derby Cars. 235.00-OBO
rick- 574-6349

Air Compressor (Buffalo) $275

2009-12-22T23:21:39-05:00

Like new Air Compressor with double tanks. Good to have if your a homeowner, and 6.5 horsepower made by US General. If interested call 706-208-6033

Delta Miter Saw (Clarence) $100

2009-12-22T23:21:14-05:00

10-inch, Delta miter saw, model 34-080, cast iron base, manuals incl., blade not incl. Call-585-509-6034

DeWalt Radial Arm saw (clarence) $100

2009-12-22T23:17:40-05:00

10-inch, DeWalt 770 delux power shop radial arm saw, 2 1/4 HP, 3-inch cut, totally enclosed motor with stand, have original instruction manuals, circa 1977. call 585-509-6034

Craftsman 17 Gal Air Compressor (Chaffee, NY) $150

2009-12-22T21:34:22-05:00

I purchased this new, approximately 1 year ago. It was over $200 new. This is an upright mobile air compressor. It works like new

716-481-7442

MANY TOOLS AND METERS (WHEATFIELD, N.Y.)

2009-12-22T20:39:51-05:00

James G Biddle Co.
Megger insulation tester, complete with instruction manual,
carrying case and test leads...........................$100.00

New Beha-Unitest DR701 phase rotation meter with carrying case......$75.00

New Amprobe clamp-on ammeter with leads for voltage and resistance readings. Complete with carrying case..........$75.00

Ridgid heavy duty pipe cutter. Pipe sizes 1/8" to 2"..............$65.00

New Amprobe Deca-tran Mod. A50, 10:1 ratio mulitlier for up to 1200 amps with carrying case........$40.00

New AW Speery Multi-tran Mod MT-1000, 10:1 ratio snap around extender for clamp-on ammeters with carrying case.............$40.00

New Wiggens style voltage tester................$20.00

Lathe+End Mill Bits (Angola) $150

2009-12-22T18:13:01-05:00

HHS+Carbite lathe bits. 4 + 2 flute end mill cutters. asking $150 obo. For more info. call (716) 983 4778

28' Werner Fiberglass Ladder (Amherst) $100

2009-12-22T18:10:24-05:00

Hi,

I'm selling my old ladder as I just got a brand new one. It's a yellow, heavy-duty Werner 28' fiberglass ladder with cable hooks and v-brace for line work. Older, but in decent shape with no major cracks, missing rungs, etc... The only problem it has is that it's missing one of the little plastic doohickeys that's part of the rung-catch. It's only like $5.00 from Werner, and an easy fix. Can be seen in Amherst anytime.

Thanks for looking!
Justin
716-818-7736

Air Compressor 60 gal. (Angola) $200

2009-12-22T18:02:40-05:00

220v air compressor with casters. runs good. has air regulator and water seperator. for more information call (716) 983 4778.

Craftsman jointer 6 1/8" (lyndonville) $350

2009-12-22T17:29:04-05:00

This is a 6 1/8" jointer. It is in great shape. I hardly used it. It is similer to Item # 21705 on the Sears web site. Price is $350. My # is 585-301-0861. Pics coming soon.
Scott

Air/Pneumatic drum pump (elma) $100

2009-12-22T16:57:53-05:00

Air operated drum pump. I have used it to transfer waste oil, and now don't need it.

Measurement & Inspection Tools - Starrett, Brown & Sharpe, Lufkin (West Seneca, NY) $300

2009-12-22T16:55:22-05:00

Measuring and inspection tools from L.S. Starrett, Brown & Sharpe, Lufkin & others.

Brown & Sharpe:

No. 48 mechanical outside micrometer, 1-2� w/ gage & case

No. 10 mechanical outside micrometer, 0-1� w/ ball attachment & box

No. 607 mechanical depth micrometer, 1�, 2� & 3� rods w/ case

Vernier depth gage, 0-5� w/ case

No. 263 solid-rod inside micrometer w/ case

L.S. Starrett:

No. 436 mechanical outside micrometer, 2-3�

No. 226 mechanical outside micrometer, 3-4�

No. 585C mechanical outside micrometer, 1-2�

No. 446 mechanical depth micrometer, 2 � 2.5� w/ two 1/2" collars

Solid-rod inside micrometer, 2-12� rods w/ case

Telescoping gage, 1 telescoping arm, 1.25-2�

Lufkin:

Telescoping gage, 2 telescoping arms, 0.75-1.25�

Telescoping gage, 2 telescoping arms, 2-3.5�

Telescoping gage, 2 telescoping arms, 3.5-6.25�

Various or Unmarked:

1x Inside caliper, spring-type

2x Outside caliper, spring-type

1x Divider

2x Outside caliper, firm-joint-type

Miscellaneous:

12x Arkansas oil stones - square, round & triangular

All tools are functional and in good shape. Would like to see them all in the hands of someone who can use them again.

$300. SERIOUS INQUIRIES ONLY!

Thank you!

SNAP-ON 1/2" IMPACT GUN NEW (DEPEW NY) $250

2009-12-22T15:55:25-05:00

This is a brand new Snap-On 1/2" impact gun model MG725. Thanks 716 681-5743.

SNAP-ON 3/8" AIR RATCHET (DEPEW NY) $175

2009-12-22T15:55:03-05:00

This is a brand new Snap-On 3/8" air ratchet model number FAR72C. Thanks 716 681-5743.

Twin head halogen work lights - NEW (North Buffalo) $20

2009-12-22T15:17:24-05:00

Handy man halogen work lights.
Brand new: bulbs still in their boxes, the stand is still bubble-wrapped and unassembled
7 foot long, grounded cord
Telescoping stand extends up to 6' high
Each light moves independently, swivels side to side, tilts up and down
Safety glass w/ UV filter
Includes spare 500 watt bulb
We have 2 sets of these available.

Delta 10" Pro Radial Arm Saw (North Tonawanda) $850

2009-12-22T14:05:36-05:00

Delta 10" Professional Radial Arm Saw, w/table legs...Like NEW!
1 1/2 hp, 120 v, 13.0 amp, 3,450 rpm.
Comes w/a 10" Dewalt blade, still in nice condition.
This saw has hardly been used. They retail for $1,600.00 - $1,800.00.
Asking $850.00 obo.
Can deliver locally.
Call Rod at 716-479-1280.

DeWalt DW272 Drywall Screwdriver Screwgun (Depew, NY) $40

2009-12-22T13:58:47-05:00

This DeWalt DW272 Drywall Screwdriver Screwgun is in excellent used working condition.

Please stop in or call:
Cash & Go Pawn
5844 Transit Rd
Depew, NY 14043
716-681-PAWN(7296)
Corner of Transit Rd and George Urban Blvd
Open Mon, Wed, Thurs 10-6, Fri & Sat 10-5.
**More Tools Available**
**We are Paying Top Dollar For Your Gold**
**We Buy & Loan New & Used Gold**
**We also Buy & Loan Larger Diamonds**
**Walk in with Gold and Walk Out with Cash**

Ridgid R3001 Reciprocating Saw & Bag (Depew, NY) $50

2009-12-22T13:50:33-05:00

This Ridgid R3001 Reciprocating Saw & Bag is in excellent used working condition.
Features
11 Amp motor � insures tool longevity
Variable speed � for cutting a wide variety of materials
Tool free blade change � for quick easy blade changes
Die cast gear housing � for added durability
Adjustable/pivoting shoe � to maintain cutting stability
Front and rear rubber grip areas � for improved grip
Accessible brushes � for minimum downtime

Specifications
Input: 11 Amps.
No Load Speeds: 0 - 2,800 r/min.
Stroke Length: 1-1/8 in.
Tool Length: 17-3/4 in.
Tool Weight: 7.8 lb.

Please stop in or call:
Cash & Go Pawn
5844 Transit Rd
Depew, NY 14043
716-681-PAWN(7296)
Corner of Transit Rd and George Urban Blvd
Open Mon, Wed, Thurs 10-6, Fri & Sat 10-5.
**More Tools Available**
**We are Paying Top Dollar For Your Gold**
**We Buy & Loan New & Used Gold**
**We also Buy & Loan Larger Diamonds**
**Walk in with Gold and Walk Out with Cash**

Snap-On Blue-Point AT200D 1/4" Drive Air Ratchet (Depew, NY) $75

2009-12-22T12:59:26-05:00

This Snap-On Blue-Point AT200D 1/4" Air Ratchet is in good used working condition. 20 ft. lb. maximum torque
� Lightweight aluminum housing
� Rugged ball bearing mounted air motor and precision planetary gear system
Please stop in or call:
Cash & Go Pawn
5844 Transit Rd
Depew, NY 14043
716-681-PAWN(7296)
Corner of Transit Rd and George Urban Blvd
Open Mon, Wed, Thurs 10-6, Fri & Sat 10-5.

Milwaukee 6190-20 14" Heavy Duty Chop Saw (North Tonawanda) $300

2009-12-22T12:46:32-05:00

Used Milwaukee 6190-20 Heavy Duty Chop Saw w/14" Dewalt steel cutting blade. ($120.00 value)
This saw retails for $450.00 - $550.00 w/o the steel blade!
It is in nice shape, and works perfect.
$300.00 obo.
Wife says I have too many toys, uhh...tools.
Call Rod @ 716-479-1280.

Hitachi Framing Nailer (Hamburg) $179

2009-12-22T12:45:35-05:00

Hitachi Framing Nailer NR90AE

Product Description

The Hitachi NR90AE 3-1/2-Inch Round-Head Framing Nailer offers great performance in a compact, lightweight package. The NR90AE is best used for floor and wall framing, truss buildup, window buildup, construction of subflooring and roof decking, wall sheathing, and mobile home and modular home construction. With tool-less depth-of-drive adjustment and durable construction, the NR90AE is built for accurate results and heavy-duty use, making it an ideal tool for construction workers, contractors and carpenters.

Adjustable Depth of Drive for Accuracy
The NR90AE features a convenient depth-of-drive adjustment knob located near the nose. Simply turn the dial half way to make quick, accurate modifications to the driving depth with no tools required.

Quick-Load Magazine for Reduced Downtime
For further convenience, the NR90AE features a lightweight anodized aluminum back-loading magazine that's designed for quick and easy loading of round-head plastic strip nails from two to 3-1/2 inches in length. The magazine has a nail capacity of 64-70 nails, which is equivalent to two nail strips. To replenish nails, simply insert a nail strip into the back of the magazine, slide the nail strip forward, and pull the nail feed back to engage the nailer--the entire process takes only a matter of seconds.

Dual Firing Options for Precise or Continuous Driving
Featuring ANSI-compliant select actuation for making tool-less firing transitions, the NR90AE Framing Nailer can be used for a variety of different applications. By simply sliding the selection control up or down with your hand, you can choose between intermittent and continuous firing. Intermittent firing is ideal for jobs that require precise driving, while the continuous setting can be used to fire nails at a rapid pace by using a bumping motion along the workpiece.

Designed for Comfort and Efficiency
Well balanced at just 7.5 pounds and measuring 18-13/16 x 4-29/32 x 12-11/16 inches (LxWxH), the NR90AE is easy to maneuver. Its soft rubber grip provides optimum control and extended comfort for all-day jobs.For further ease of use, a hardened toenail push lever will help the nailer stand up to wear and tear. And in case you get a jammed nail, the open nose design will make extraction a cinch.

Designed with a 3/8-inch NPT thread air inlet, the NR90AE requires 70-120 psi operating pressure to function properly. It takes in air at a rate of 0.088 cubic feet per cycle at 100 psi.
This item retails for $284.99

Stop by
Tower Wholesale
5160 Camp Road
Hamburg NY
312 7895

Hours:
Monday 10am-5pm
Tuesday thru Friday 10am-7pm
Saturday 10am-5pm

Senco Duraspin (Hamburg) $80

2009-12-22T12:29:38-05:00

Senco Duraspin DS202-14V

Product Description

The Senco DS202-14V 14.4-Volt Ni-Cad Cordless Screwdriver is designed for a wide variety of screw fastening applications ,including drywall to wood, drywall to steel, interior wood to wood, and exterior wood to wood. For use with 1- to 2-inch screws, this cordless screwdrivers features a powerful 2,300 RPM high-torque motor and a reverse switch to back out driven screws without any strain. Its easy depth of drive adjustment regulates the precise amount of countersink. Included with the driver is a one-hour charger and a back up battery, ensuring that you'll never be without power on the job. And with a 50-screw capacity in each strip, the Senco DS202-14V will speed up your production time.

Includes

Senco DS202-14V Cordless Screwdriver, 2 14.4-volt batteries, one-hour battery charger, and rugged carrying case

Stop by
Tower Wholesale
5160 Camp Road
Hamburg NY
312 7895

Hours:
Monday 10am-5pm
Tuesday thru Friday 10am-7pm
Saturday 10am-5pm

NIb DEWALT DC9PAKIA Heavy-Duty 18-Volt Cordless 9-Tool Combo Kit (buffalo ) $450

2009-12-22T12:18:49-05:00

Technical Details
9 quality DEWALT 18-volt cordless tools to meet all your remodeling needs
All cordless tools operate off of the popular DEWALT 18-volt cordless platform
Kit includes: DC385 XRP reciprocating saw, DC550 18-volt cut-out tool, DW056 impact driver, DC411 XRP cut-off tool, DW919 18-volt floodlight, DC330 XRP variable-speed jig saw, DC390 XRP circular saw, powerful DC925 XRP cordless hammerdrill,and DW059 high torque impact wrench .

Guardian ULTRASOURCE 15000 Watts $750

2009-12-22T12:17:55-05:00

Features:

22,500 Surge Watts
Powerful enough to start a four ton A/C unit

Electric Start
Starts with a simple press of a button

Automatic Idle Control
Reduces noise, increase fuel efficiency and extends life

Full Pressure Lubrication
Eliminates wear during startup and extends life

16-Gallon Gas Tank
Generates up to 10 hours of electricity at half load

Portablility Kit
Includes 13" all terrain tires and heavy-duty lifting eye

3-D Alignment Machine - John Bean (Jersey Shore) $7900

2009-12-22T11:55:14-05:00

This is the latest technology in computerized alignments. No compensating tires, precise and accurate. It comes complete with instruction manual and is very easy to operate. I am a former Automotive shop owner who is retiring. You can call me at 570-295-4191 or email cgonzales1548@aol.com my name is Mat.

DELTA SCROLL SAW (WILSON) $50

2009-12-22T11:16:11-05:00

THIS A 15 INCH DELTA SCROLL SAW THAT WORKS PERFECT. only $50.00

CONBINATION BELT SANDER (WILSON) $50

2009-12-22T11:10:13-05:00

THIS IS A CRAFTSMAN BELT AND DISC SANDER IN GOOD WORKING CONDITION. just $50.00

Delta 20 inch wood planer (Greece NY) $1550

2009-12-22T10:50:05-05:00

Delta 20 inch planer 5 horse 3 phase motor new sharpened blades just installed, and extra set of blades included, plus tool to install same power table for more info contact Joe at 585-802-9947

RYOBI ANGLE GRINDER (cheektowaga)

2009-12-22T10:20:14-05:00

i have a almost new only used a few times ryobi angle grinder with everthing in the box including the wire brush and the grinding wheel make offer call 716-517-0604 scammers dont waste ur time

Delta Shaper platinum edition (alden) $1800

2009-12-22T10:04:53-05:00

this is a delta shaper 3hp. used for 2 projects. has very little surface rust from sitting in shop. style and rail cutters, adapter for router bits and extras. any woodworkers dream tool. please call dennis at 716-913-2930 for any questions.

SNAP-ON IMPACT SOCKETS (DEPEW NY) $100

2009-12-22T10:01:24-05:00

This is a set of Snap-On impact swivel sockets 6 point metric 10mm to 19mm. Thanks 716 681-5743.

SNAP-ON 1/2" RATCHET (DEPEW NY) $35

2009-12-22T10:01:02-05:00

This is a nice Snap-On 1/2" ratchet model SL710. Thanks 716 681-5743.

SNAP-ON SOCKET SET 1/4" (DEPEW NY) $75

2009-12-22T10:00:31-05:00

This is a nice Snap-On 1/4" socket set 5/32 to 9/16 6 point. This set comes with the sockets 1/4" breaker bar t bar, ext and 3 8 point sockets. Thanks 716 681-5743.

MILWAUKEE HAMMERDRILL (DEPEW NY) $250

2009-12-22T10:00:09-05:00

This is a nice 11 amp milwaukee rotary hammerdrill model 5315-21 with bits and the case. Thanks 716 681-5743

STANLEY WOOD PLANES (DEPEW NY) $10

2009-12-22T09:59:48-05:00

I have Stanley wood planes for 10.00 each. Thanks 716 681-5743.

Rotary Mid Rise Lift (WNY) $850

2009-12-22T09:11:29-05:00

Mid Rise Lift Made By Rotary Works Excellent, 120V

Oxygen Acetylene Airco Cutting Torch tips (Tonawanda) $40

2009-12-22T07:26:21-05:00

5 New Airco cutting torch tips. $50.00 for all

1 - 854 4400 - 144-0
2 - 854 4401 - 144-1
1 - 854 4402 - 144-2
1 - 854 4402 - 144-3
435-5581

OXYGEN ACETYLENE REGULATORS (TONAWANDA) $50

2009-12-22T07:25:03-05:00

3 REGULATORS.

1 - Airco oxygen regulator - rebuilt, 1 new gauge
1 - Airco acetylene regulator - good used
1 - Harris Calorific acetylene gauge - rebuilt, 1 new gauge (missing cover)

435-5581

NEW IN BOX! JET 10" Contractor Table Saw ++ (NIAGARA FALLS) $900

2009-12-22T00:05:21-05:00

JET 10" TABLE SAW WITH ALL THE ACCESSORIES STILL IN THE BOXES $900.00 OR BEST OFFER! JET IS THE BEST!

******ALSO INCLUDES: Jet JWTS-10LFR 10" table saw, PLUS:MGF-52 model #708672 rail set, XACTAFENCE kit #708294Z, and external leg set. *******

The Jet Contractor Table Saw is a 10-inch, right-tilting saw built with steel wings and is perfect for a wide range of industrial-strength jobs. The 1-1/2 HP, 1 phase, 115/230 Volt motor provides dependable cutting power, the quick-connect motor to switch plug design is pre-wired for easy set up. The clear blade guard with splitter and anti-kickback pawls increases safety while also giving you a clear view of the material being cut. The heavy-duty trunnion design also helps ensure accurate blade alignment. This table saw includes a deluxe miter gauge with positive stops that features an extra-long bar for a larger crosscutting capacity.

SPECS:Motor 1-1/2 HP; 1 Ph Blade Diameter 10" Arbor Diameter 5/8" Arbor Speed 3,600 RPM Maximum Depth of Cut 3-1/8" Maximum Depth Of Cut (at 45�) 2-1/8" Maximum Diameter Of Dado 8" Maximum Width of Dado 13/16" Table Size (w/ Extension) 27" x 44" (L x W) Table Size (w/o Extension) 27" x 20" (L x W) Dust Collection Minimum CFM Required 350 CFM Dust Port Diameter 2-1/2" Maximum Rip Right of Blade 30" Table Height 36-1/2" Table In Front Of Saw Blade At Maximum Depth Of Cut 10-1/2" Maximum Rip Left of Blade 12" Overall Dimensions 42" x 56" x 40" Motor Amperage 12/6 Amps Net Weight 212 lbs.

El Casino Gold Mine Flea Market *WE BUY AND SELL* 7 days a week 10-7pm Flea Market... 2008 PINE AV NIAGARA FALLS, NY 14301 Call : 716-804-3934 $$$$$$ Print out this ad and bring it with you to get 10% off purchases over $100.00 !! $$$$$$

3-Phase Elecrical Disconnects (Franklinville) $650

2009-12-21T23:36:46-05:00

Three-Phase Electrical Disconnects, 3, 60 Amps, 600 Volts. 2 circut breaker enclosures 100 Amps, 600 Volts. All Brand New! $650 Call for Siemens' numbers. 716-474-7447.

....South Bend & Logan Lathes (Franklinville) $1000

2009-12-21T23:12:53-05:00

South Bend Lathe - Heavy 10 or K10, three-phase power. Everything works. $2200

Logan Lathe Model#200 - 10" swing, 110 power. Everything works. $1000

Call 716-474-7447

Re: jumpstarting 18v batts (tonawanda)

2009-12-21T22:46:38-05:00

Somebody has you snowballed. I'd pay money to watch your batt blow up, make sure you wear goggles when some equally foolish moron attempts this in his garage, as the batt acid will do interesting things to your skin, after the welder does the river dance across the bench and floor, coating you and not least of which your eyes and exposed membrane tissue, ie - lips, nostil openings, oh, and yeah, go ahead an piss on it to relieve the pain. I'll be the rube that will lay claim to that hook in your mouth. You people make me laugh, and hey, the ER at ECMC/K'more Mercy, etc., needs a head shaking snicker/laugh after you leave.

48" Niagara Foot Shear (????)

2009-12-21T22:44:29-05:00

to the person with 48" Niagara Foot Shear please call me as I cannot get through to you thank you Kevin 315-573-3275

CHAINSAW SHARPENING STAND (Franklinville) $350

2009-12-21T22:40:51-05:00

Precision Tooling chain grinder, chain breaker, rivet, spinner. Six grinding wheels. Does all chains up to .404 pitch. Stand is on wheels. $350 Call 716-474-7447

back draft plow (buffalo) $2000

2009-12-21T22:05:57-05:00

trades considered all wiring mount everything and switch

AMPROBE CLAMP-ON AMMETER (WHEATFIELD, NY)

2009-12-21T19:51:39-05:00

.

AMPROBE CLAMP-ON AMMETER

AMPERAGE SCALES...6, 15, 40, 100, 300 AMPS

VOLTAGE SCALES....150, 300, 600 VOLTS

RESISTANCE SCALES...0-1000 OHMS

INCLUDES LEADS FOR VOLTAGE READINGS & LEADS FOR RESISTANCE READINGS

COMPLETE WITH CARRYING CASE..........$75.00

ALSO AVAILABLE IS A COMPANION AMPROBE 10 TO 1 DECA-TRAN MULTIPLIER

COMPLETE WITH CARRYING CASE..........$40.00

BOTH THE CLAMP-ON AMMETER AND THE MULTIPLIER ARE NEW,

HAVE NEVER BEEN USED AND ARE STILL IN THE BOX

TOGETHER THEY CAN BE HAD FOR $100

.

Dewalt 10" Radial Arm Saw...Commercial Grade $525/BO (Akron Area)

2009-12-21T19:17:00-05:00

I am making room in my basement and am getting rid of my Dewalt Radial 10" Arm Saw....model is Powershop series....with base and top...it works really well and I really do not want to get rid of it ( They dont make them like this anymore!!!)....but i am done with my projects and trying to make room for my kids setup in the basement...so again it is a really good unit and been about a year or so since i used it...but as you can see it is in great shape and cuts through anything...also it is a 110V unit....so email me with questions or number and i will get back to you in a timely manner.

Blades included are:
Dewalt 10" Combo $49
8" combo $25.
9" Carbide $60
10" Industrial $50
Micro set Adjustable DADO $160

Please put Dewalt or Saw in your Subject Line!

LOGAN SCRUW CUTTING AND TURRET LATHE (ELMA) $1250

2009-12-21T18:03:58-05:00

MODEL # 1957 It has a Rohm 200 8" 3 gaw chuck the motor is 230 volt 3 phase motor, the bed length is 42 inches it can take up to 11" round work piece. there is 33- 5c collets worth about $950 and i have extra boxes of stuff that will go with it. Worked fine just needs to be cleaned up . I dont have room for it anymore needs to go asap! call 716 512 5528 thanks for looking

Weldmark Cutmaster by Victor Cutting & Welding Outfit (Depew, NY) $125

2009-12-21T17:58:06-05:00

This Weldmark Cutmaster by Victor Cutting and Welding Outfit Kit is in excellent condition. Model #250-510.
Please stop in or call:
Cash & Go Pawn
5844 Transit Rd
Depew, NY 14043
716-681-PAWN(7296)
Corner of Transit Rd and George Urban Blvd
Open Mon, Wed, Thurs 10-6, Fri & Sat 10-5.
**More Tools Available**
**We are Paying Top Dollar For Your Gold**
**We Buy & Loan New & Used Gold**
**We also Buy & Loan Larger Diamonds**
**Walk in with Gold and Walk Out with Cash**

Mac Tools Padded Creeper with Adjustable Head Rest (Depew, NY) $85

2009-12-21T17:54:35-05:00

This Mac Tools Padded Creeper is in excellent used condition and has the adjustable padded head rest.
Please stop in or call:
Cash & Go Pawn
5844 Transit Rd
Depew, NY 14043
716-681-PAWN(7296)
Corner of Transit Rd and George Urban Blvd
Open Mon, Wed, Thurs 10-6, Fri & Sat 10-5.
**More Snap-On & Mac Tools Available**
**We are Paying Top Dollar For Your Gold**
**We Buy & Loan New & Used Gold**
**We also Buy & Loan Larger Diamonds**
**Walk in with Gold and Walk Out with Cash**

Lift Bags ( 24,000 lift ) for underwater salvage or aircraft-New--each (Atlanta) $395

2009-12-21T16:30:49-05:00

New 24,000 capacity lift bags in crate. Very heave reinforced construction. Shipping weight is 331 lbs. Crate volume is 1.1 cu.meters ( or 42 cu/ft ). Includes heavy canvas sling/cover with aluminum buckles and also 1" ID hose at 200PSI ( 30' minimum length ). Original use was military aircraft maintenance. Can deliver for a fee. Call Mike @ 770.833.7915.

Band Saw 14" (Southtowns) $600

2009-12-21T15:59:21-05:00

Steel City 14"granite top band saw, comes with two fences only used a couple times. This is well built and heavy has full cabinet with built in casters. $600

Black & Decker Belt Sander (North Buffalo) $40

2009-12-21T15:48:24-05:00

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++/
+++
+++ Black & Decker Belt Sander
+++ 3� x 21� Belt
+++ 1/3 HP (max motor output)
+++ Type 1
+++ AMPS 3.4
+++ SFPM 600
+++ Double Insulated
+++
+++ Do Not E-Mail Me From a gMail, aim Account
+++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++/

Sears Roebuck 10 inch Compound Miter Saw (North Buffalo) $65

2009-12-21T15:43:50-05:00

Compound Miter Saw
Sears Roebuck 10 inch Compound Miter Saw (chop saw)

Send an e-mail to schedule a time to purchase this
10 inch Compound Miter Saw for $75

e-mails from @gmail.com, @aim.com are flagged to be deleted

Craftsman Wrenches - Lots of Sizes (Tonawanda) $1

2009-12-21T14:20:43-05:00

Tons of wrenches - get 'em while they last!

Craftsman ASE Combination Wrenchs. No reasonable offer refused. Email or call Dave at 716-213-8191 (not all wrenches in pic)

5/16 x 1
11/32 x 4
3/8 x 4
7/16 x 4
1/2 x 4
9/16 x 4
5/8 x 4
11/16 x 4
3/4 x 4
13/16 x 10
7/8 x 10
15/16 x 10
1 x 9
1 1/16 x 9
1 1/8 x 8
1 1/4 x 8

Can you jump start my 18 volt cordless tool batteries? (Lancaster) $1

2009-12-21T13:03:45-05:00

I have seen and read that you can jump start dead cordless tool batteries with welders, etc. I have three that I need done. Will pay for you to do. E-mail if you are the one. Thanks!

RYOBI SAWZALL (DEPEW NY) $35

2009-12-21T12:11:39-05:00

This is a Ryobi sawzall 6.5amp RJ162V. Thanks 716 681-5743.

RYOBI CIRCULAR SAW (DEPEW NY) $20

2009-12-21T12:11:17-05:00

This is a Ryobi circular saw 12 amp 7 1/4". Thanks 716 681-5743.

MIG WELDER FIREPOWER NEW (DEPEW NY) $425

2009-12-21T12:10:57-05:00

This is a brand new firepower mig welder model 160 130 amp 220 volt. It comes with the regulator hose kit cart and bottle. Thanks 716 681-5743.

Master Mechanics Tool Set (Jamestown) $3000

2009-12-21T12:01:39-05:00

Complets Set of Automotive Hand Tools including: Mac 20 drawer roll cab, American and Metric (too numerous to list all), Many Specialty Tools.
email for details

smaller table saw w/stand (freedom) $125

2009-12-21T11:49:47-05:00

nice smaller table saw on stand i dont think its been used very much needs a little cleaning the top is 27x16in 125.00 b/o if interested please call 716-492-4027 if im not in please leave message

Tool Rack on Wheels (Buffalo) $25

2009-12-21T11:40:21-05:00

Suncast tool holding rack
does not come with tools

list foe $45, on sale foe $39, asking $25 never been opened,never been used

nice smaller electric cement mixer (freedom) $150

2009-12-21T11:35:24-05:00

for sale is a very nice smaller cement mixer looks seldom used electric has 2 wheels nice 150.00 b/o if interested please call 716-492-4027 if im out please leave message

GOLDBLATT TEXTURE (POPCORN) CEILING SPRAYER!!! (AMH/NT) $300

2009-12-21T11:29:00-05:00

For sale is a used goldblatt's texture (popcorn) ceiling sprayer. It is in fine working condition and the gun is included. The asking price is $300 or b/o. For more information feel free to call (716) 308-2010.

Warner Electric Wallpaper Remover (AMH/NT) $300

2009-12-21T11:25:24-05:00

For sale is a used Warner Electric Wallpaper Remover. The steamer is in fine working condition; the hose and paddles are included. The asking price is $300 or b/o. For more information feel free to call (716) 308-2010

Table Saw RYOBI (Amh/NT) $150

2009-12-21T11:21:17-05:00

Bench Top Table Saw. Model # BT2500. RYOBI 10" w/ New Blade. For more info call 716-308-2010.

Jack Hammer (Bosch) (Amherst) $500

2009-12-21T11:19:29-05:00

Bosch Brute Electric Jack Hammer . Cart and Bits included. $500.00 or Best Offer. Needs hand switch. For info call 716-308-2010

Shop Smith (Buffalo) $400

2009-12-21T10:11:31-05:00

Shop Smith with drill press, table saw, planer/shaper, disk sander and lathe attachments. Older model but fully functioning. Comes with stand and lots of extras.
Call Chris 716-553-9052, $400/bo

Hitachi framing nail w/nails also more tools (akron) $150

2009-12-21T10:04:30-05:00

selling a hitachi framing gun in great condition w/part case of nails $150.00
also more hitachi,makita,dewalt,portercable and more call 585-356-9014 and to view more tools click my web site http://dpsresale.com

Coleman Powermate GX390 Generator (Finger Lakes) $750

2009-12-21T09:44:11-05:00

Premium Plus Series
Rated Watts 6500
Surge Watts 7800
Honda Engine 13.0
(2) 120v AC with circuit breakers
(1) 120v/240v AC
Nice Generator. Seldom used.
750.00 or make reasonable offer.

Dewalt Model 1450 Radial Arm Saw (Amherst) $50

2009-12-21T09:41:19-05:00

Older saw, cast iron, heavy. Does everything well, except the lock for the angles does not catch. It does bevel, rip, straight cut 90 degree but will not lock at other degrees. I believe the cast iron clamp that locks it may be cracked. Otherwise a very good saw. 10" blade. Fisrt $50 takes it.

Binks HVLP 98-1261 (Elma) $499

2009-12-21T09:30:54-05:00

Cart Mounted Conversion HV/LP Outfit, Nozzle Size 0.055 Inch, Fluid Delivery Speed Medium/Fast, Fluid Delivery Pressure, Pattern Size 10 Inches, Paint Viscosity Very Low to High, Finish Quality Professional, Includes 2 Gallons Tank, Compressor, Gun and Cart
Condition: Very Good, Used

Radiant Heater (Cheektowaga) $250

2009-12-21T09:19:30-05:00

Gordon Ray 75,000 BTU per hour
Model RTH-75A
21'6" Long
new bearings in motor
very good condition
583-0462 Kevin

harris guages (west seneca) $200

2009-12-21T08:41:54-05:00

tanks and torches 716 866 7954

Imitation Gerstner (S. Cheektowaga) $75

2009-12-21T08:21:25-05:00

This would make a lovely Christmas gift,

NEW AND HAS NEVER BEEN USED I bought this toolbox when I was toolmaker, then switched careers so it never made it in to the tool room, a tool has never been placed inside it, MINT condition. I am not sure what kind of wood it is but you are more than welcome to come look at it.

Over dimensions, 2 feet long, 18 1/2 inches tall, 11 inches wide.

9 drawers plus large top compartment

6 small drawers, 11 7/8 inches long, 9 7/8 inches wide, 1 1/4 inch deep.

3 large drawers, 2 feet long, 9 7/8 inches wide, 2 inches deep.

Top compartment, 2 feet long, 9 7/8 inches wide, 2 1/2 inches deep.

This toolbox has a lot of space, all drawers and top compartment are green felt lined, the top compartment has a triangular mirror(see photo) all corners have metal protectors, toolbox has metal side handles, does not have a lock, paid $189.00 for it when purchased.

This toolbox isn't anything to fancy or your most expensive wooden toolbox, however is is beautiful and very functional.

This toolbox would make a wonderful gift or a great addition for anyone looking for a new toolbox or an additional one, great for machinist tooling, or the general hobbyist.

You can reach me at 361-5102, leave your name and number and I will get back to you asap, or contact me via Craigs list e mail Thanks, Annie

3/4" & 1" masonary bits (alden m) $25

2009-12-21T08:03:30-05:00

2 each 3/4"x 12" and 1" x 12" carbide tipped masonary bits. brand new. never used. 25.00 for all. call Jim 716 937-4694. no e-mails.

Little Giant Pipe & Bolt Threading Handle w/ dies (Hamburg, NY) $25

2009-12-21T07:16:19-05:00

We have a Little Giant assortment of dies:
5/16 NC 18
5/8 NC 11
7/8 NC 9
1" USS 8
These dies fit the handle shown. $25.00 cash only. Call Jeff to see at 716 289-6959

Manual Tire Changer (West Seneca) $30

2009-12-21T06:53:01-05:00

This is a Central Machinery Model 34542 manual tire changer. When bolted to the floor, it makes tire changing pretty easy.

I purchased it from Harbor Freight for my father a while ago.

You can look at: http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=34542

It has barely been used and is just taking up space.

email anyname2529@yahoo.com or leave a message at 716-783-2415 if interested - will also accept best offer

Lawn Mower Comerical Type Manufactured by White (North Buffalo) $95

2009-12-20T22:40:22-05:00

Lawn Mower Comerical Type Manufactured by White, Lawn 190 mower, stored several years needs tun up, sold for over $800.00 when new, must see!

metal dust vent (metal ventilation) $575

2009-12-20T21:15:00-05:00

metal ventilation collector more than i need
208/230/460 three phase
3500 rpm motor
industrial unit great condition see pics

Heavy duty scroll saw and jointer for sale (Lewiston) $75

2009-12-20T19:28:21-05:00

Heavy duty Atlas scroll saw. 24 inch reach from blade to saw structure. Mounted on a stand. This is an older saw but works great and is very heavy. $75

Delta Rockwell 4" jointer. 1/4 inch depth maximum cut. Mounted on a stand and is heavy duty. $75

Must go!!!

SnapOn Toolbox full of Tools (14737) $5500

2009-12-20T19:22:13-05:00

Selling a complete collection of tools and tool box. There is a SnapOn KR660B roller cabinet, a SnapOn KR690 chest and an International side cabinet. The overall size of the box is about 5-1/2' tall and 4-1/2'" wide. The side box is an additional 17.5" wide and 55.75" tall. The tools are SnapOn, Mac, Craftsman, Blue Point and maybe some other brands. The box is full of metric and SAE tools. There are combination wrenches, open end wrenches, box end wrenches, gear wrenches and stubby wrenches. 1/4" drive, 3/8" drive, 1/2" drive and 3/4" drive ratchets and extensions with deep and shallow 6 point and 12 point sockets along with torx and allen sockets. There are screwdrivers, pry bars, nutdrivers, pliers, crescent wrenches, Channel locks, wire strippers, snap ring pliers, t-handle hex key set, dead blow hammers, tap and die set, spindle nut set, timing light and miscellaneous chisels. I am also including my air tools consisting of air ratchets, impacts and die grinder. Maybe more that I'm forgetting. Everything is in great condition. Must sell! Call me at 716-913-8778 or email at esmith429@gmail.com.

steamcleaner (angola) $250

2009-12-20T19:13:45-05:00

propane fired steam cleaner,works good, 250.00, call 716-570-1880, john

Compact Step Ladder reach 19' Ceiling $329

2009-12-20T17:50:27-05:00

Faxko Tripod Ladder System

Please order the item at http://www.faxko.com. The price included Shipping & Handling. The item is located in Troy, Michigan. E-mail: sale@faxko.com, Phone: 248-782-5104,

* Safest ladder in its class
* Highest reach stepladder in stores
* Allow hand free operations
* Can be used on an uneven surface
* Small package and light weight
* Fly Section can be used as a stand alone unit
* Only need one person to operate

Specifications for Model T-12:
-Highest Reach: 18�7� assume a 5�6� person with a vertical 12� reach
-Highest Standing Level: 12�1� vertical height
-Storage Length: 8�7�
-System Weight: 48 lb. (21.8 Kg)
-Fly Section Weight: 28.6 lb. (13 Kg) without extension members
-Load Capacity: 300 lb (Type 1A)

Why Tripod Ladder System?

1. Safety:
* Tripod ladder provide wider support base so that it is more stable than conventional stepladder.
* The safety belt at the top of the ladder would protect the user from off balance positions.

2. Capability:
* The system can provide higher reach than any stepladder system in stores. Perfect for high ceiling houses. (At full extension, it is equivalent to 16' traditional stepladder)
* Since the 3 Legs are independently adjustable, the system can be used on an uneven surface. Great for outdoor applications.

3. Convenience:
* The safety belt allows hand free operations so that you can work with your both hands.
* Small package and light weight for ease of storage and transportation.

4. Versatility:
* The fly section can be used independently without the extension members. Hence, it would increase mobility for low elevation applications.
* The ladder can be set-up for AGAINST WALL applications. It is safer than using an extension ladder. Since the ladder top would not touch the wall, it would not have any risk of damaging the wall.

5. Save $$:
* This ladder is equivalent to 16' traditional stepladders that are sold around $600.

Since the tripod ladder system can be used as low/high stepladders and replace for extension ladders, an average home owner would only need a tripod ladder system for all the tasks. If you have a high ceiling in your house, this is the only ladder system that is able to address all your needs.

This is a new product and not available at any stores.

Please visit http://www.faxko.com for more information and ordering the item.

airless paint Application System (Tonawanda ny) $250

2009-12-20T17:44:01-05:00

Magnum Airless Paint Application System.
SG1-EF Spray gun with easy access in handle filter
3/16 x 25FT.Duraflex airless paint hose
515 reverse a clean (RAC) lV switch tip
.015 Max tip Size
3/8 HP motor
0.24 gallons per minute max Delivery rate

This unit was used three or four days.Was cleaned out good.Stored in oil to keep seals and operating parts lubricated
I Am selling this unit because i need money so it is 250.00 dollars or Best Offer. i Paid 400 for it one year ago
Call 716-694-2510 for more info or for location to Pick Up (No shipping) available.

MEGGER (WHEATFIELD NY)

2009-12-20T17:34:43-05:00

.

JAMES G. BIDDLE COMPANY..

MEGGER INSULATION TESTER..

COMPLETE WITH INSTRUCTION MANUAL..

CARRYING CASE AND TEST LEADS..

$100.00

radiant tube heater (angola) $650

2009-12-20T16:57:23-05:00

reznor radiant tube heater,200,000 btu, 50' long, works great, too big for my shop,my loss is your gain,650.00 call 716-570-1880, john

LADDER WERNER 8FT FIBERGLASS (DEPEW NY) $55

2009-12-20T15:40:21-05:00

This is a nice werner 8ft type 1 fiberglass ladder 250lbs. Thanks 716 681-5743.

ACTION PARTS WASHER (DEPEW NY) $75

2009-12-20T15:39:55-05:00

This is a nice action parts washer. Thanks 716 681-5743.

RYOBI CHOP SAW 14" (DEPEW NY) $100

2009-12-20T15:39:26-05:00

This is a like new ryobi chop saw 14" 15 amp model c357. Thanks 716 681-5743.

CM 3/4 TON CHAIN HOIST (DEPEW NY) $85

2009-12-20T15:38:16-05:00

This is a nice CM 3/4 TON Chain hoist with the extra long chain. Thanks 716 681-5743.

Snap On Classic 78 flame roll cab (Orchard Park NY) $3800

2009-12-20T14:53:28-05:00

i have this basically new Snap on Tool box and my girlfriend just had our baby so we are looking for extra money for baby stuff and a downpayment on a apartment so i am trying to sell this the price of this new was $4795 so you would be getting a great deal it is in absolutely new condition with not one knick or scratch on it im willing to work out delivering it so let me know the size is 54" wide. i also have a complete set of snap on tools which may also be available. you can call or text 716 997 7140 if interested. this needs to go asap.

Biesemeyer Wood Working Equipment (Cheektowaga)

2009-12-20T14:37:41-05:00

Biesmeyer Equipment

Cross Cut Sled
Miter Sled
Miter Saw Table
Stop Brackets

$425 or B/O takes it all

Please call - 716-946-8087

3HP TECUMSEH ICE KING AUGAR (lockport ny) $175

2009-12-20T14:23:11-05:00

GOING ICE FISHING? 3HP TECUMSEH ICE KING AUGAR RUNS GREAT. CONTACT millerlandscapingdesign@live.com

Router Table w/bits & Routers (Wilson, NY) $400

2009-12-20T14:14:35-05:00

This is a new router table hand-made from instructions of Norm Abrahams (this old houuse).
Dad made it, outfitted it, purchased two routers, many bits, etc. ,
He died before it was ever used at all. I don't have the room to store it any longer.
This is probably worth closer to $1,000 w/all the materials,
blue prints, lumber,bits, manuals, new wooden box of never used bits., tools, etc.

Call for appt. 716 751-3990

Rubbermaid Cart (North Tonawanda) $25

2009-12-20T13:43:55-05:00

USED
2 X 3 Rubbermaid rolling Cart
32'' high
200lb cappacity
Light weight
Works Great

Ryobi Laser level package, New (lkpt)

2009-12-20T11:19:25-05:00

Ryobi Laser level package $40.00

craftsman 7/8 hp shaper router (clarence) $60

2009-12-20T11:19:17-05:00

older 7/8 hp benchtop shaper router in good shape heavy duty steel top! and steel stand included

no pics if you want this you probably know what it is model number 149.23910